dmesg - Intel Xeon
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.0.0-12-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC 2011 (Ubuntu 3.0.0-12.20-generic 3.0.4)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfff3000 (usable)
BIOS-e820: 00000000dfff3000 - 00000000dfffb000 (ACPI data)
BIOS-e820: 00000000dfffb000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000011bfff000 (usable)
NX (Execute Disable) protection: active
DMI 2.3 present.
DMI: HP ProLiant DL380 G4, BIOS P51 04/26/2006
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x11bfff max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0E0000000 mask FE0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xdfff3 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f4f80] f4f80
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-00000000dfff3000
0000000000 - 00dfe00000 page 2M
00dfe00000 - 00dfff3000 page 4k
kernel direct mapping tables up to dfff3000 @ dffed000-dfff3000
init_memory_mapping: 0000000100000000-000000011bfff000
0100000000 - 011be00000 page 2M
011be00000 - 011bfff000 page 4k
kernel direct mapping tables up to 11bfff000 @ 11bff8000-11bfff000
RAMDISK: 365ba000 - 372d5000
ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
ACPI: XSDT 00000000dfff3300 00044 (v01 HP P51 00000002 Ò? 0000162E)
ACPI: FACP 00000000dfff3380 000F4 (v03 HP P51 00000002 Ò? 0000162E)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20110413/tbfadt-610)
ACPI: DSDT 00000000dfff3480 02D62 (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 00000000dfff3100 00040
ACPI: SPCR 00000000dfff3140 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E)
ACPI: MCFG 00000000dfff31c0 0003C (v01 HP ProLiant 00000001 00000000)
ACPI: APIC 00000000dfff3200 000C2 (v01 HP 00000083 00000002 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000011bfff000
Initmem setup node 0 0000000000000000-000000011bfff000
NODE_DATA [000000011bffa000 - 000000011bffefff]
[ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880117600000-ffff88011affffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0011bfff
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000dfff3
0: 0x00100000 -> 0x0011bfff
On node 0 totalpages: 1032065
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3922 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 899115 pages, LIFO batch:31
Normal zone: 1568 pages used for memmap
Normal zone: 113119 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec80400, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec84000] gsi_base[72])
IOAPIC[3]: apic_id 11, version 32, address 0xfec84000, GSI 72-95
ACPI: IOAPIC (id[0x0c] address[0xfec84400] gsi_base[96])
IOAPIC[4]: apic_id 12, version 32, address 0xfec84400, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 136
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000dfff3000 - 00000000dfffb000
PM: Registered nosave memory: 00000000dfffb000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88011bc00000 s79616 r8192 d22784 u262144
pcpu-alloc: s79616 r8192 d22784 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1016156
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3975040k/4653052k available (6104k kernel code, 524792k absent, 153220k reserved, 4880k data, 984k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:2048 16
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 3199.920 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.84 BogoMIPS (lpj=12799680)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110413
ftrace: allocating 25651 entries in 101 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(TM) CPU 3.20GHz stepping 03
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version: 0
... bit width: 40
... generic registers: 18
... value mask: 000000ffffffffff
... max period: 0000007fffffffff
... fixed-purpose events: 0
... event mask: 000000000003ffff
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 9a000
#2
smpboot cpu 2: start_ip = 9a000
#3
smpboot cpu 3: start_ip = 9a000
Brought up 4 CPUs
Total of 4 processors activated (25601.93 BogoMIPS).
devtmpfs: initialized
print_constraints: dummy:
Time: 13:05:58 Date: 12/19/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: Intel Corporation E7520 Memory Controller Hub with MMCONFIG support
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: HP ProLiant DL380 detected, enabling pci=bfsort.
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
pci 0000:00:00.0: [8086:3590] type 0 class 0x000600
pci 0000:00:02.0: [8086:3595] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:06.0: [8086:3599] type 1 class 0x000604
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0x2000-0x201f]
pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0x2020-0x203f]
pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0x2040-0x205f]
pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03
pci 0000:00:1d.3: reg 20: [io 0x2060-0x207f]
pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfbef0000-0xfbef03ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.1: [8086:24db] type 0 class 0x000101
pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
pci 0000:00:1f.1: reg 20: [io 0x0500-0x050f]
pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
pci 0000:02:00.0: [8086:0329] type 1 class 0x000604
pci 0000:02:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.2: [8086:032a] type 1 class 0x000604
pci 0000:02:00.2: PXH quirk detected; SHPC device MSI disabled
pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
pci 0000:02:00.2: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 02-04]
pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdffffff]
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:01.0: [14e4:1648] type 0 class 0x000200
pci 0000:03:01.0: reg 10: [mem 0xfdef0000-0xfdefffff 64bit]
pci 0000:03:01.0: PME# supported from D3hot D3cold
pci 0000:03:01.0: PME# disabled
pci 0000:03:01.1: [14e4:1648] type 0 class 0x000200
pci 0000:03:01.1: reg 10: [mem 0xfdee0000-0xfdeeffff 64bit]
pci 0000:03:01.1: PME# supported from D3hot D3cold
pci 0000:03:01.1: PME# disabled
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:02:00.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:02:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:03.0: [0e11:0046] type 0 class 0x000104
pci 0000:04:03.0: reg 10: [mem 0xfdff0000-0xfdff1fff 64bit]
pci 0000:04:03.0: reg 18: [io 0x4000-0x40ff]
pci 0000:04:03.0: reg 1c: [mem 0xfdf80000-0xfdfbffff 64bit]
pci 0000:04:03.0: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:04:03.0: supports D1
pci 0000:02:00.2: PCI bridge to [bus 04-04]
pci 0000:02:00.2: bridge window [io 0x4000-0x4fff]
pci 0000:02:00.2: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:02:00.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: [8086:0329] type 1 class 0x000604
pci 0000:05:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.2: [8086:032a] type 1 class 0x000604
pci 0000:05:00.2: PXH quirk detected; SHPC device MSI disabled
pci 0000:05:00.2: PME# supported from D0 D3hot D3cold
pci 0000:05:00.2: PME# disabled
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:06.0: PCI bridge to [bus 05-0c]
pci 0000:00:06.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: PCI bridge to [bus 06-09]
pci 0000:05:00.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:05:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:05:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.2: PCI bridge to [bus 0a-0c]
pci 0000:05:00.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:05:00.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:05:00.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:03.0: [1002:4752] type 0 class 0x000300
pci 0000:01:03.0: reg 10: [mem 0xfc000000-0xfcffffff]
pci 0000:01:03.0: reg 14: [io 0x3000-0x30ff]
pci 0000:01:03.0: reg 18: [mem 0xfbff0000-0xfbff0fff]
pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:04.0: [0e11:b203] type 0 class 0x000880
pci 0000:01:04.0: reg 10: [io 0x1800-0x18ff]
pci 0000:01:04.0: reg 14: [mem 0xfbfe0000-0xfbfe01ff]
pci 0000:01:04.2: [0e11:b204] type 0 class 0x000880
pci 0000:01:04.2: reg 10: [io 0x3400-0x34ff]
pci 0000:01:04.2: reg 14: [mem 0xfbfd0000-0xfbfd07ff]
pci 0000:01:04.2: reg 18: [mem 0xfbfc0000-0xfbfc1fff]
pci 0000:01:04.2: reg 1c: [mem 0xfbf00000-0xfbf7ffff]
pci 0000:01:04.2: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
pci 0000:01:04.2: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x3fff]
pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfcffffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0.PCXA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0.PCXB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0.PCXC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0.PCXD._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7 10 11)
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:03.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:1d.0: address space collision: [io 0x2000-0x201f] conflicts with PCI Bus 0000:01 [io 0x1000-0x3fff]
pci 0000:00:1d.1: address space collision: [io 0x2020-0x203f] conflicts with PCI Bus 0000:01 [io 0x1000-0x3fff]
pci 0000:00:1d.2: address space collision: [io 0x2040-0x205f] conflicts with PCI Bus 0000:01 [io 0x1000-0x3fff]
pci 0000:00:1d.3: address space collision: [io 0x2060-0x207f] conflicts with PCI Bus 0000:01 [io 0x1000-0x3fff]
reserve RAM buffer: 000000000009f400 - 000000000009ffff
reserve RAM buffer: 00000000dfff3000 - 00000000dfffffff
reserve RAM buffer: 000000011bfff000 - 000000011bffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #3
Switched to NOHz mode on CPU #1
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-7f]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0xe0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0070-0x0077]
pnp 00:01: [io 0x0408-0x040f]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0020-0x003f]
pnp 00:01: [io 0x00a0-0x00bf]
pnp 00:01: [io 0x0090-0x009f]
pnp 00:01: [io 0x0050-0x0053]
pnp 00:01: [io 0x0700-0x071f]
pnp 00:01: [io 0x0800-0x083f]
pnp 00:01: [io 0x0900-0x097f]
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0c80-0x0c83]
pnp 00:01: [io 0x0cd4-0x0cd7]
pnp 00:01: [io 0x0f50-0x0f58]
pnp 00:01: [io 0x02f8-0x02ff]
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: disabling [io 0x0010-0x001f] because it overlaps 0000:00:1d.0 BAR 4 [io 0x0000-0x001f]
pnp 00:01: disabling [io 0x0010-0x001f disabled] because it overlaps 0000:00:1d.1 BAR 4 [io 0x0000-0x001f]
pnp 00:01: disabling [io 0x0010-0x001f disabled] because it overlaps 0000:00:1d.2 BAR 4 [io 0x0000-0x001f]
pnp 00:01: disabling [io 0x0010-0x001f disabled] because it overlaps 0000:00:1d.3 BAR 4 [io 0x0000-0x001f]
system 00:01: [io 0x0408-0x040f] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0700-0x071f] has been reserved
system 00:01: [io 0x0800-0x083f] has been reserved
system 00:01: [io 0x0900-0x097f] has been reserved
system 00:01: [io 0x0c80-0x0c83] has been reserved
system 00:01: [io 0x0cd4-0x0cd7] has been reserved
system 00:01: [io 0x0f50-0x0f58] has been reserved
system 00:01: [io 0x02f8-0x02ff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 7]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0080-0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: [io 0x0060]
pnp 00:04: [io 0x0064]
pnp 00:04: [irq 1]
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: [irq 12]
pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:06: [io 0x002e-0x002f]
pnp 00:06: [io 0x004e-0x004f]
pnp 00:06: [io 0x0220-0x025f]
pnp 00:06: [io 0x0280-0x029f]
pnp 00:06: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:07: [irq 4]
pnp 00:07: [io 0x03f8-0x03ff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:08: [irq 6]
pnp 00:08: [dma 2]
pnp 00:08: [io 0x03f2-0x03f5]
pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:02.0: BAR 15: assigned [mem 0xf0000000-0xf00fffff pref]
pci 0000:00:1e.0: BAR 15: assigned [mem 0xf0100000-0xf01fffff pref]
pci 0000:00:1f.1: BAR 5: assigned [mem 0xf0200000-0xf02003ff]
pci 0000:00:1f.1: BAR 5: set to [mem 0xf0200000-0xf02003ff] (PCI address [0xf0200000-0xf02003ff])
pci 0000:00:1d.0: BAR 4: assigned [io 0x5000-0x501f]
pci 0000:00:1d.0: BAR 4: set to [io 0x5000-0x501f] (PCI address [0x5000-0x501f])
pci 0000:00:1d.1: BAR 4: assigned [io 0x5020-0x503f]
pci 0000:00:1d.1: BAR 4: set to [io 0x5020-0x503f] (PCI address [0x5020-0x503f])
pci 0000:00:1d.2: BAR 4: assigned [io 0x5040-0x505f]
pci 0000:00:1d.2: BAR 4: set to [io 0x5040-0x505f] (PCI address [0x5040-0x505f])
pci 0000:00:1d.3: BAR 4: assigned [io 0x5060-0x507f]
pci 0000:00:1d.3: BAR 4: set to [io 0x5060-0x507f] (PCI address [0x5060-0x507f])
pci 0000:02:00.2: BAR 15: assigned [mem 0xf0000000-0xf00fffff pref]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [io disabled]
pci 0000:02:00.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:02:00.0: bridge window [mem pref disabled]
pci 0000:04:03.0: BAR 6: assigned [mem 0xf0000000-0xf003ffff pref]
pci 0000:02:00.2: PCI bridge to [bus 04-04]
pci 0000:02:00.2: bridge window [io 0x4000-0x4fff]
pci 0000:02:00.2: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:02:00.2: bridge window [mem 0xf0000000-0xf00fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 02-04]
pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdffffff]
pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf00fffff pref]
pci 0000:05:00.0: PCI bridge to [bus 06-09]
pci 0000:05:00.0: bridge window [io disabled]
pci 0000:05:00.0: bridge window [mem disabled]
pci 0000:05:00.0: bridge window [mem pref disabled]
pci 0000:05:00.2: PCI bridge to [bus 0a-0c]
pci 0000:05:00.2: bridge window [io disabled]
pci 0000:05:00.2: bridge window [mem disabled]
pci 0000:05:00.2: bridge window [mem pref disabled]
pci 0000:00:06.0: PCI bridge to [bus 05-0c]
pci 0000:00:06.0: bridge window [io disabled]
pci 0000:00:06.0: bridge window [mem disabled]
pci 0000:00:06.0: bridge window [mem pref disabled]
pci 0000:01:03.0: BAR 6: assigned [mem 0xf0100000-0xf011ffff pref]
pci 0000:01:04.2: BAR 6: assigned [mem 0xf0120000-0xf012ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0: bridge window [io 0x1000-0x3fff]
pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfcffffff]
pci 0000:00:1e.0: bridge window [mem 0xf0100000-0xf01fffff pref]
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
pci 0000:02:00.0: setting latency timer to 64
pci 0000:02:00.2: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:06.0: setting latency timer to 64
pci 0000:05:00.0: setting latency timer to 64
pci 0000:05:00.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdffffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff pref]
pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf00fffff pref]
pci_bus 0000:01: resource 0 [io 0x1000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xfbf00000-0xfcffffff]
pci_bus 0000:01: resource 2 [mem 0xf0100000-0xf01fffff pref]
pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: rerouting interrupts for [8086:0329]
pci 0000:02:00.2: rerouting interrupts for [8086:032a]
pci 0000:05:00.0: rerouting interrupts for [8086:0329]
pci 0000:05:00.2: rerouting interrupts for [8086:032a]
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800dbfed000 - ffff8800dffed000
software IO TLB at phys 0xdbfed000 - 0xdffed000
platform rtc_cmos: registered platform RTC device (no PNP device found)
audit: initializing netlink socket (disabled)
type=2000 audit(1355922358.416:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.16)
msgmni has been set to 7763
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
ERST: Table is not found!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Freeing initrd memory: 13420k freed
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ata_piix 0000:00:1f.1: can't derive routing for PCI INT A
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbef0000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005020
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005060
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 8:356:79
rtc_cmos rtc_cmos: setting system clock to 2012-12-19 13:05:59 UTC (1355922359)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
ata1.00: ATAPI: CD-224E, 9.9A, max MWDMA2
ata1.00: configured for MWDMA2
scsi 0:0:0:0: CD-ROM TEAC CD-224E 9.9A PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 984k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 20k freed
Freeing unused kernel memory: 1400k freed
udevd[93]: starting version 173
HP CISS Driver (v 3.6.26)
tg3.c:v3.119 (May 18, 2011)
tg3 0000:03:01.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25
cciss 0000:04:03.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
tg3 0000:03:01.0: eth0: Tigon3 [partno(N/A) rev 2100] (PCIX:133MHz:64-bit) MAC address 00:16:35:06:09:19
tg3 0000:03:01.0: eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:03:01.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:01.0: eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
tg3 0000:03:01.1: PCI INT B -> GSI 26 (level, low) -> IRQ 26
cciss 0000:04:03.0: cciss0: at PCI 0000:04:03.0 IRQ 51 using DAC
cciss/c0d0: p1 p2 < p5 >
cciss/c0d1: unknown partition table
cciss/c0d2: unknown partition table
tg3 0000:03:01.1: eth1: Tigon3 [partno(N/A) rev 2100] (PCIX:133MHz:64-bit) MAC address 00:16:35:06:09:18
tg3 0000:03:01.1: eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:03:01.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:03:01.1: eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
usb 5-1: new low speed USB device number 2 using uhci_hcd
Refined TSC clocksource calibration: 3200.113 MHz.
Switching to clocksource tsc
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (cciss/c0d0p1): mounted filesystem with ordered data mode
usb 5-2: new low speed USB device number 3 using uhci_hcd
Adding 2939856k swap on /dev/cciss/c0d0p5. Priority:-1 extents:1 across:2939856k
udevd[282]: starting version 173
lp: driver loaded but no devices found
EXT3-fs (cciss/c0d0p1): using internal journal
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
hpilo 0000:01:04.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
intel_rng: FWH not detected
EDAC MC: Ver: 2.1.0
Contact your BIOS vendor to see if the E752x error registers can be safely un-hidden
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input2
input: Logitech N43 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input3
generic-usb 0003:046D:C000.0001: input,hidraw0: USB HID v1.00 Mouse [Logitech N43] on usb-0000:00:1d.3-1/input0
input: SILITEK USB Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input4
generic-usb 0003:047B:0002.0002: input,hidraw1: USB HID v1.00 Keyboard [SILITEK USB Keyboard and Mouse] on usb-0000:00:1d.3-2/input0
input: SILITEK USB Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/input/input5
generic-usb 0003:047B:0002.0003: input,hidraw2: USB HID v1.00 Mouse [SILITEK USB Keyboard and Mouse] on usb-0000:00:1d.3-2/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
vesafb: mode is 1280x1024x24, linelength=3840, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xfc000000, mapped to 0xffffc90001180000, using 3840k, total 3840k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
ppdev: user-space parallel port driver
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
tg3 0000:03:01.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:03:01.0: eth0: Flow control is on for TX and on for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: failsafe main process (612) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
eth0: no IPv6 routers present
init: plymouth-stop pre-start process (1328) terminated with status 1
tg3 0000:03:01.0: eth0: Link is down
tg3 0000:03:01.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:03:01.0: eth0: Flow control is on for TX and on for RX
init: smbd main process (633) killed by TERM signal
udevd[29631]: starting version 173
init: modemmanager main process (30016) terminated with status 255
init: modemmanager main process ended, respawning
init: modemmanager main process (30019) terminated with status 255
init: modemmanager main process ended, respawning
init: modemmanager main process (30021) terminated with status 255
init: modemmanager main process ended, respawning
init: modemmanager main process (30023) terminated with status 255
init: modemmanager main process ended, respawning
init: modemmanager main process (30025) terminated with status 255
init: modemmanager main process ended, respawning
init: modemmanager main process (30027) terminated with status 255
init: modemmanager main process ended, respawning
init: modemmanager main process (30029) terminated with status 255
init: modemmanager main process ended, respawning
init: modemmanager main process (30031) terminated with status 255
init: modemmanager main process ended, respawning
init: modemmanager main process (30033) terminated with status 255
init: modemmanager main process ended, respawning
init: modemmanager main process (30035) terminated with status 255
init: modemmanager main process ended, respawning
init: modemmanager main process (30037) terminated with status 255
init: modemmanager respawning too fast, stopped
CPU3: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Core temperature/speed normal
CPU1: Core temperature/speed normal
[Hardware Error]: Machine check events logged